Paradigm™ Low Retention Tips Reload System
Paradigm™ Pipette Tips were created to improve pipetting accuracy while also increasing throughput.
Lift-and-Load System
The Paradigm™ Lift-and-Load Reload System is designed to simplify reloading empty racks without handling the actual tips, thus preventing contamination.
No special alignment tools are required to quickly transfer a fresh grid of tips to an empty rack. Simply lift a grid from the protective paperboard packaging and clip it into an empty rack.
For easy tip identification, the reload grids are imprinted with the tip size and the lot number, visible even when seated inside the rack.
The reload tips can be sterilised by autoclaving at 121 C and 15 psi for 15 minutes.

Benefits
The innovation begins with a proprietary resin that ensures the sample will not bind to the tip so it is dispensed completely. Physical design characteristics like thin walls and a finely tapered tip point, facilitate sample release and eliminate the need to touch off the pipette tip.
Filtered Tips
Paradigm filtered pipette tips offer an extra level of confidence and control by providing a barrier between the nose cone of the pipettor and the sample.
The Paradigm filter membrane:
Composed of high-density polyethylene (HDPE)
Contains no additives that can contaminate samples if encountered
Provides a barrier against contamination, but will not impede airflow
Hydrophobic properties prevent absorption of samples
Clean Liquid Release
Paradigm tips administer a virtually clean sample release, guaranteeing minimal time is spent waiting for the last drop to fall from the tip. Users will maintain complete control, even when working with smaller volumes, without compromising the accuracy and precision of their pipetting.
Low Retention
Considerably more hydrophobic than standard tips, Paradigm tips enable even viscous fluids to be dispensed more completely.

