Thermal Cycler Base Unit GeneTouch for PCR in a Choice of Blocks sold separately Adjustable hot lid fast ramp rates and easy programming

The Bioer GeneTouch™ thermal cycler offers the maximum flexibility that can be tailored to your specific requirements. At the heart of the GeneTouch thermal cycler is advanced Peltier technology from the world’s leading manufacturer, providing precise and rapid temperature control for accurate PCR and quality results. The GeneTouch is exceptionally quiet when running, so you hardly notice it’s there!

The GeneTouch base unit accepts five interchangeable blocks, 96 and 384 well gradient, dual 48 well, universal (0.2 and 0.5ml tubes) and in situ, providing the flexibility to adapt to changing PCR formats.

The GeneTouch has Gradient functionality for rapid optimisation with a handy gradient setting tool.
The height and temperature adjustable hot-lid enables oil-free operation with pressure adjustable fit for various laboratory consumables.

The choice of running multiple units from a LAN network, individually direct from a PC, or as stand-alone instruments provides very flexible operation.

Tube or block temperature control modes.

The GeneTouch also comes with a three year warranty.

Software and Interface
Easy programming of complex protocols such as Touchdown, Long and Nested PCR in just a few seconds
Automatic shut-off of hot-lid
The USB interface enables you to save an unlimited amount of protocols and is the best way to store programmes whilst also protecting them from interference
Software is provided enabling programmes to be created on your PC, and saved to a USB flash drive device

LCD Touch Screen
6.5 inch large full colour touch screen menu and display
Uses optical compensation film technology. The maximum viewing angle is 160 degrees
Clear display during program run

Specifications
Cooling technology: Peltier-based
Display: 6.5 inch, 262k-colour LCD display and intuitive touch screen for rapid set up
Temperature range: 4 C ~ 105 C
Heating/Cooling speed of ramping: Up to 4 C/sec Depending on which block is used
Temperature uniformity: ≤±0.2 C
Temperature accuracy: ≤±0.1 C (55 C) : ≤±0.2 C (≥90 C)
Temperature control modes: Block or Tube
Ramping range adjustable: 0.1 C - 4 C
Memory: ≥ 250 typical programs on-board, unlimited with USB flash drive expansion
Maximum number of cycles: 99 suitable for Nested PCR
Time up/down: 0~9min 59sec, suitable for Long PCR
Temperature up/down: 0.1~9.9C, suitable for Touchdown PCR
Auto pause/power protection: Yes
Gradient temperature range: 30 C ~ 105 C
Gradient range of temp differential: 1 C ~ 30 C
Hot-lid temperature range: 30 C ~ 110 C
Height of hot-lid: Stepless adjustment
Hot-lid auto shut-off function: The hot-lid can be programmed to turn off when the block temperature falls below a set value, or when the run finishes
Interfaces: USB and LAN
Power supply: 100-240v, 50-60Hz, 600W
Dimensions (WxDxH): 368 x 250 x 285mm
Net weight: 10.5kg

Choose from the following block options which are purchased separately from the base unit:
TC1110 - 96 well block with gradient function for rapid optimisation
TC1120 - 48 well dual block. Two independent blocks
TC1130 - Universal block for 0.2 or 0.5ml tubes
TC1140 - 384 well block with gradient function for rapid optimisation
TC1150 - in situ block