Sample transport system for mailing of category B biological samples to UN3373 P650 packaging instruction Rigid Flexible 95 500G

These systems meet the UN3373 P650 packaging instruction and offer a complete solution for sample containers which do not fit into any of the SpeciSafe range, or where the primary container is not 95kPa compliant. They comprise a 95kPa pouch with appropriately sized absorbent sheet, and an outer rigid box, already labelled with all appropriate UN3373 required information. They also include a tamper evident seal.

Available in 5 different sizes, with an option for an insulated pack, they are compatible with a vast range of sample containers.

All the components can also be purchased individually ensuring even greater flexibility in the choice of packaging materials for the laboratory and ensuring minimal postage costs are incurred.

UN3373 Standard – Key Requirements
The P650 packaging instructions for liquid substances state:-
a. The primary receptacle(s) shall be leak proof;
b. The secondary packaging shall be leak proof;
c. The primary receptacle or the secondary packaging shall be capable of withstanding, without leakage, an internal pressure of 95 kPa (0.95 bar);
d. If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them;
e. Absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging;
f. Either the secondary or outer packaging must be rigid.
The packaging must be of good quality and strong enough to withstand the shocks and loadings normally encountered during transport. It must prevent any loss of contents that could occur due to vibration or changes in temperature, humidity or pressure.

Specification
Description: Rigid Flexible 95 500G
Dimensions: 194 x 125 x 102mm

Contents
95kPa Pouch: C4 198 x 298mm
Absorbent: 200ml 150 x 250mm
Security Seal: Tamper evident adhesive closure
Labelling: Full instructions for assembly, Space to add sender and addressee information, Regulatory Markings

Packaging: Pack of 25 Packaging kits - supplied flat packed to minimise storage space requirements.