Absorbent 4 bay pouch capable of absorbing liquid from up to 4 typical blood tubes used in sample transport when packaging to UN3373 regulations
Product code: AB010
Pack Size: 500
CE Verified: No
Product Information
These super absorbent 4 bay pouches can be used with all types of packaging to help meet UN3373 regulations.
UN3373 Standard – Key Requirements
The P650 packaging instructions for liquid substances state:-
a. The primary receptacle(s) shall be leak proof;
b. The secondary packaging shall be leak proof;
c. The primary receptacle or the secondary packaging shall be capable of withstanding, without leakage, an internal pressure of 95 kPa (0.95 bar);
d. If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them;
e. Absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging;
f. Either the secondary or outer packaging must be rigid.
The packaging must be of good quality and strong enough to withstand the shocks and loadings normally encountered during transport. It must prevent any loss of contents that could occur due to vibration or changes in temperature, humidity or pressure.
This 4 bay pouch design is suitable for sending up to 4 blood type or similar tubes and keeping them separated from each other, without the need to wrap each one individually. The pouch can absorb sufficient liquid such that if all 4 vials failed in some way, all the liquid would be absorbed. Absorbency is measured using a blood substitute and greater volumes will be absorbed with other fluids.
More than one sheet can be added to any packaging if required, to ensure that it would absorb all the sample in the event of catastrophic leakage. The absorbent sheets are lint free, and even when completely saturated will stay in one piece, making them easier to remove.
Specification
Form: 4 bay pouch
Absorbency: Up to 4x blood collection type tubes
Colour: White
Packaging: Pack of 500 pre-formed into pouches
UN3373 Standard – Key Requirements
The P650 packaging instructions for liquid substances state:-
a. The primary receptacle(s) shall be leak proof;
b. The secondary packaging shall be leak proof;
c. The primary receptacle or the secondary packaging shall be capable of withstanding, without leakage, an internal pressure of 95 kPa (0.95 bar);
d. If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them;
e. Absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging;
f. Either the secondary or outer packaging must be rigid.
The packaging must be of good quality and strong enough to withstand the shocks and loadings normally encountered during transport. It must prevent any loss of contents that could occur due to vibration or changes in temperature, humidity or pressure.
This 4 bay pouch design is suitable for sending up to 4 blood type or similar tubes and keeping them separated from each other, without the need to wrap each one individually. The pouch can absorb sufficient liquid such that if all 4 vials failed in some way, all the liquid would be absorbed. Absorbency is measured using a blood substitute and greater volumes will be absorbed with other fluids.
More than one sheet can be added to any packaging if required, to ensure that it would absorb all the sample in the event of catastrophic leakage. The absorbent sheets are lint free, and even when completely saturated will stay in one piece, making them easier to remove.
Specification
Form: 4 bay pouch
Absorbency: Up to 4x blood collection type tubes
Colour: White
Packaging: Pack of 500 pre-formed into pouches
Specification
- Brand Alpha Laboratories
- Sterile N
- CE Certified No
- Warranty Period Standard Terms Apply
- Is product classified as dangerous goods? No
- Does the product contain latex? Unspecified
- Material Super absorbent sheet
- Length 225mm
- Height 2mm
- Width 125mm
- Application Type Absorbent pouch for Mailing of UN3373 Category B Biological Samples
Storage Details
- Pack Description 500
- Shipping Condition Ambient
- Storage Condition Ambient
- Pack Length (m) 0.432
- Pack Width (m) 0.318
- Pack Height (m) 0.318
- Pack Weight (kg) 4.10
You may also be interested in
1 ? activePage - 1 : activePage" >Prev
Next