Gel Tank Vertical Clarit-E Maxi Z Dual 20x20cm for protein electrophoresis in polyacrylamide gels without caster

The Maxi Z is one of the most versatile maxi vertical systems available. Only 4 screws are needed to secure up to 4 gels making set up much faster than traditional clamping configurations. The ultra-soft silicone mat within cam-caster compensates for glass plate misalignment to ensure leak-free casting.
The vertical screw-clamp configuration distributes pressure evenly along the height of the gel to eliminate plate bowing and gel compression for reproducible separations. Glass plates compress gently against a flat, level gasket to prevent leakage from the inner buffer chamber during electrophoresis
Whatever your requirements are the Maxi Z can be made to meet them. Regardless of whether it is first and second-dimension SDS-PAGE, native, preparative, gradient or high-resolution nucleic acid electrophoresis, capillary tube gel IEF or electro-blotting, all these techniques can be performed using the same all-purpose unit, using the optional modular inserts.
Detachable inner cooling coil enables higher voltage runs whilst maintaining uniform, smile-free electrophoresis.
Deep gel tank with space for a magnetic stirrer bar to maintain buffer recirculation and uniform pH
Robust 4mm thick ground glass plates with bonded spacers consistent with comb thickness ensure 'clean' well formation, as well as the correct alignment for leak-free casting. Bonded spacers and combs colour coded for thickness
Notched glass plates with bonded spacers allow gel capacity to be doubled from 2 to 4, while a dummy plate allows single gels to be run

Specifications
Plate dimensions: 20x20x0.4cm
Unit Dimensions: 30x18x27cm
Number of gels: 1-4
Buffer Volume: Inner chamber 640ml, Outer tank - for 2 gels 5.3L, for 4 gels 4.8L
Combs available (number of sample wells): 1, 5, 10, 18MC, 24, 30, 36MC, 48 - MC denotes well spacings are compatible with multichannel pipettes
Comb thicknesses: 0.75, 1, 1.5, 2mm
Recommended Power Supply: EL2705, EL2707, EL2730, EL2750 (for blotting)
Typical Running Conditions for SDS PAGE: 100V or 35mA (constant) for maximum 5 hours

Accessories
EL2100-18MC-0.75 Comb 18 sample MC, 0.75mm -Vertical Maxi
EL2100-18MC-1 Comb 18 sample MC, 1mm -Vertical Maxi
EL2100-18MC-1.5 Comb 18 sample MC, 1.5mm -Vertical Maxi
EL2100-24-1 Comb 24 sample, 1mm - Maxi/Miniwide
EL2100-24-1.5 Comb 24 sample, 1.5mm -Vertical Maxi
EL2100-36MC-1 Comb 36MC sample, 1mm - Maxi/Miniwide
EL2100-48-1.5 Comb 48 sample, 1.5mm -Vertical Maxi
EL2110Z Dual Caster 20x20cm for Maxi Z
EL2128 Tube Gel Insert For Maxi & 10 Tubes
EL2128Z Tube gel insert for Maxi Z with 10 tubes
EL2130 Maxi Capillary Tubes
EL2132 Maxi Capillary tubes 1.5mm
EL2134 Blotting Insert For Maxi & 3 Cassettes
EL2134Z-HI High intensity blot MaxiZ insert 20x20cm
EL2136 Blotting Cassette For Vertical Maxi
EL2138 Fibre Pads For Clarit-E Vertical Maxi
EL2140 Cooling Block for Clarit-E Vertical Maxi
EL2177Z Glass plate Notched 20 x 20cm for IEF
EL2178 Replacement Platinum Wire 0.2mm - 100cm
EL2179Z IEF Conversion Kit for strips/Tube gels