Micromanipulator Model MM33 Right-Handed Configuration compatible with Drummond Nanoject II™ Auto-Nanolitre Injector

Selecting the correct Micromanipulator for your application is very important. The Drummond Micromanipulator Model MM3, with its numerous options was designed for repetitive applications. The Micromanipulator has three stacked, stainless steel roller bearing raceways providing movement in the X, Y and Z axes. Rack and pinion drives minimize backlash and provide fast positioning and long life. The lateral (Y-axis) and vertical (Z-axis) planes each have 20 mm of travel graduated in 0.1 mm increments. The probe direction (X-axis) has 37 mm of travel. Two adjustments are provided. The coarse adjustment is graduated in 0.1 mm increments while the fine adjustment provides 10 mm of travel with precision positioning graduated in 0.01 mm increments. A unique and valuable feature of these Micromanipulators is that the three control knobs are located in a single plane. This positioning permits one-handed control of a single instrument, without taking the operator's eyes from the microscope. It also allows several micromanipulators to be closely positioned side-by-side with all control knobs easily accessible. This Micromanipulator has a right-handed configuration and a left-handed configuration is also available. Each Micromanipulator is supplied complete with one or two tool/electrode holders. The second holder has two fine controls that allow movement of 8 mm in both the lateral (Y) and probe (X) direction independent of the Micromanipulator. Two additional fine controls allow this second tool/electrode holder to be tilted and swivelled. A choice of either a tilt base or a clamp to mount the micromanipulator on a 13 mm (1/2 inch) OD vertical rod is offered with each Micromanipulator. Other clamps are available as accessories. The tilt base permits the manipulator to be tilted 80° from the vertical. The Manipulators with clamp mount are supplied with a 1/2 inch to 10 mm bushing which permits mounting on a magnetic base. The Micromanipulator is suitable for use with Microscope magnifications up to 250x and is recommended for use with the Drummond Nanoject II and Nanoject III Auto-Nanolitre Injectors.