Gel Tank Vertical Clarit-E Mini Wide Dual 20x10cm for protein electrophoresis in polyacrylamide gels without caster

For SDS PAGE, Native PAGE, Gradient, Second dimension and Nucleic acid separations. The Clarit-E Mini Wide Vertical Dual 20x10cm gel tank is constructed using the latest injection moulding manufacturing techniques. This gives a high quality, low cost product with unsurpassed finish, durability and strength. With an active gel width of 18cm the unit allows double the number of samples to be resolved compared to the Mini unit. This allows consistency of sample comparison on a single gel and is designed for those with greater than 20 samples to compare and resolve. Simple set up using ultra-soft silicone seals guarantees trouble free glass plate loading and gel casting. Dual gaskets on the gel running insert along with notched and plain glass plates ensure leak-proof gel running. Rapid set up cooling retains resolution in extended separations and also saves on buffer volume without affecting run quality.
4mm thick glass plates reduce breakage and have bonded spacers for added convenience. A wide range of accessories is available allowing many techniques to be performed using the same unit. Prep combs can be used to maximise sample loading and recovery. Accessory electroblotting and tube gel modules are available which use the same outer tank and lid.

Includes Mini Wide gel tank and lid with power cables, 2x sets of glass plates with 1mm bonded spacers, 2x combs of your choice. Please note if comb thickness is changed, spacers will also need to be changed.

Specifications
Gel Dimensions:18x8cm
Plate dimensions: 20x10x0.4cm
Unit Dimensions: 26x16x16cm
Number of gels: 2
Buffer Volume: Inner chamber 250ml, Outer tank - Minimum 600ml, Maximum 2800ml
Combs available (number of sample wells): 1, 5, 10, 18MC, 24, 30, 36MC, 48 - MC denotes well spacings are compatible with multichannel pipettes
Comb thicknesses: 0.75, 1, 1.5, 2mm
Recommended Power Supply: EL2705, EL2707, EL2730, EL2750 (for blotting)
Typical Running Conditions for SDS PAGE: 200V (constant) or 200mA for 60 to 80 minutes

Accessories
EL2094 Inner Run Module for Vertical Mini Wide
EL2096 Tube Unit For Vertical Mini Wide
EL2098 Tube Gel Insert Mini Wide & 100 Tubes
EL2100-18MC-0.75 Comb 18 sample MC, 0.75mm -Vertical Maxi
EL2100-18MC-1 Comb 18 sample MC, 1mm -Vertical Maxi
EL2100-18MC-1.5 Comb 18 sample MC, 1.5mm -Vertical Maxi
EL2100-24-1 Comb 24 sample, 1mm - Maxi/Miniwide
EL2100-24-1.5 Comb 24 sample, 1.5mm -Vertical Maxi
EL2100-36MC-1 Comb 36MC sample, 1mm - Maxi/Miniwide
EL2100-48-1.5 Comb 48 sample, 1.5mm -Vertical Maxi
EL2106 Blotting Cassette For Vertical Mini Wide
EL2110 Dual Caster 20x20cm For Vertical Maxi and Mini Wide
EL2112 20x10cm Notched Glass Plates 4mm
EL2114 Blot Insert For Mini Wide & 3 Cassettes
EL2118 20 x 10cm Plain Plates + 0.75mm Spacers
EL2122 20x10cm Plain Plates with 1.5mm Spacers
EL2156 Dummy Plate, 20x10cm Vertical Mini Wide
EL2356 Mini Capillary Tubes 1.5mm Internal Diam
EL2030 Mini Capillary Tubes 1mm Internal Diam
EL2458 Fibre Pads Clarit-E Vertical Mini Wide