Gel Tank Vertical Clarit-E Mini Wide Dual 20x10cm for protein electrophoresis in polyacrylamide gels with caster and external casting stand

Mini Wide Vertical Gel tank, lid with power cables, PAGE internal running module, 2 sets of glass plates with 1mm bonded spacers (1 set notched, 1 set plain), dummy plate, 2 combs of your choice, cooling pack, casting base and external casting stand.

Please note if your comb thickness is changed, the spacers will also need to be changed.


Clarit-E Mini Wide Vertical Dual 20x10cm Gel Tank is perfect for SDS PAGE, Native PAGE, and Gradient PAGE. With an active gel width of 18cm, the Mini Wide unit doubles the sample capacity of standard Mini systems, enabling consistent comparison of over 20 samples on a single gel.

The casting base locks the PAGE insert onto the silicone mat to provide a leak-free seal for set-up and casting polyacrylamide gels. The additional external casting upstand allows a gel to be cast whilst the PAGE insert is in use.

•The ultra-soft silicone seal and dual gaskets ensure leak-proof gel loading and casting, the 4mm thick glass plates minimise breakage with bonded spacers to allow perfect alignment with minimal leakage.
•Rapid set up cooling retains resolution in extended separations and saves on buffer volume without affecting run quality.
•Provides enhanced performance with a detachable cooling coil to maintain resolution during long runs, providing uniform electrophoresis even at higher voltage.
•The asymmetric lid design and colour-coded pins prevent polarity errors and sample loss.
•The machine has flexibility with optional interchangeable electroblotting and tube gel modules to expand functionality, allowing PAGE, Western blotting, Capillary IEF and Slab Gel electrophoresis to be carried out in the same tank.

Specifications
Gel Dimensions:18x8cm
Unit Dimensions: 26x16x16cm
Plate dimensions: 20x10x0.4cm
Number of gels: 1-4 gels
Buffer Volume: Inner Chamber 300ml, Outer Tank: Minimum 500ml, Maximum 2 gels: 2.8L, 4 gels: 2.3L
Combs available (number of sample wells): 1, 5, 10, 18MC, 24, 30, 36MC, 48 - MC denotes well spacings are compatible with multichannel pipettes
Comb thicknesses: 0.75, 1, 1.5, 2mm
Maximum sample capacity: PAGE: 192 samples (48/gel); Blot: 4 blots; 2D: 10 tubes
Recommended Power Supply: EL2705, EL2707, For Blotting: EL2732, EL2752
Typical Running Conditions for SDS PAGE: 200V (constant) or 200mA for 60 to 80 minutes

Accessories
EL2092 – IEF Conversion Kit
EL2140 – Cooling Block
EL2114 – Blot Insert + 3 Cassettes
EL2098 – Tube Gel Insert