Gel Tank Vertical Clarit-E Mini Wide Dual 20x10cm complete modular system with running, blotting and capillary gel inserts for protein electrophoresis

For SDS PAGE, Native PAGE, Gradient, Second dimension, capillary tube gels, blotting and Nucleic acid separations. The preferred unit for routine mini protein electrophoresis, the Clarit-E Mini Wide Vertical Dual 10x10cm gel tank is constructed using the latest injection moulding manufacturing techniques. This gives a high quality, low cost product with unsurpassed finish, durability and strength. The unit incorporates a sealing system which is compatible with all major types of 8x10cm and 10x10cm precast gel. Gel casting and running utilise the same insert, no transfer of glass plates during gel casting is necessary. The insert utilises unique sliding clamps allowing very rapid set up of both hand cast and precast gels. Run up to 4 hand cast simultaneously. Ultra soft silicone seals and pressure bars which surround the glass plates guarantee leak proof gel casting. 4mm thick glass plates prevent breakage and have bonded spacers for convenience. Accessory electroblotting and tube gel modules are included which use the same outer tank and lid.

Includes Mini Wide gel tank and lid with power cables, 2x sets of glass plates with 1mm bonded spacers, 1x dummy plate, 2x combs of your choice, casting base, silicone casting mat, cooling pack, internal running module for tube gels, capillary tubes, blanking ports, 2-D combs and spacers, blotting insert, 3x compression cassettes and 12x fibre pads. Please note if comb thickness is changed, spacers will also need to be changed.

Specifications
Sample Capacity: 192 slab gel samples (48 per gel), 10 tube gels, 4 blots
Unit Dimensions: 26x16x16cm
Number of gels: 4
Buffer Volume: Minimum 600ml, Maximum 2800ml
Combs available (number of sample wells): 1, 5, 10, 18MC, 24, 30, 36MC, 48 - MC denotes well spacings are compatible with multichannel pipettes
Comb thicknesses: 0.75, 1, 1.5, 2mm
Recommended Power Supply: EL2705, EL2707, EL2730, EL2750 (for blotting)
Typical Running Conditions for SDS PAGE: 200V (constant) or 200mA for 60 to 80 minutes

Accessories
EL2094 Inner Run Module for Vertical Mini Wide
EL2096 Tube Unit For Vertical Mini Wide
EL2098 Tube Gel Insert Mini Wide & 100 Tubes
EL2100-18MC-0.75 Comb 18 sample MC, 0.75mm -Vertical Maxi
EL2100-18MC-1 Comb 18 sample MC, 1mm -Vertical Maxi
EL2100-18MC-1.5 Comb 18 sample MC, 1.5mm -Vertical Maxi
EL2100-24-1 Comb 24 sample, 1mm - Maxi/Miniwide
EL2100-24-1.5 Comb 24 sample, 1.5mm -Vertical Maxi
EL2100-36MC-1 Comb 36MC sample, 1mm - Maxi/Miniwide
EL2100-48-1.5 Comb 48 sample, 1.5mm -Vertical Maxi
EL2106 Blotting Cassette For Vertical Mini Wide
EL2110 Dual Caster 20x20cm For Vertical Maxi and Mini Wide
EL2112 20x10cm Notched Glass Plates 4mm
EL2114 Blot Insert For Mini Wide & 3 Cassettes
EL2118 20 x 10cm Plain Plates + 0.75mm Spacers
EL2122 20x10cm Plain Plates with 1.5mm Spacers
EL2156 Dummy Plate, 20x10cm Vertical Mini Wide
EL2356 Mini Capillary Tubes 1.5mm Internal Diam
EL2030 Mini Capillary Tubes 1mm Internal Diam
EL2458 Fibre Pads Clarit-E Vertical Mini Wide