Gel Tank Vertical Clarit-E Mini Dual 10x10cm complete modular system with running, blotting and capillary gel inserts for protein electrophoresis

For SDS PAGE, Native PAGE, Gradient, Second dimension, capillary tube gels, blotting and Nucleic acid separations. The preferred unit for routine mini protein electrophoresis, the Clarit-E Mini Vertical Dual 10x10cm gel tank is constructed using the latest injection moulding manufacturing techniques. This gives a high quality, low cost product with unsurpassed finish, durability and strength. The unit incorporates a sealing system which is compatible with all major types of 8x10cm and 10x10cm precast gel. Gel casting and running utilise the same insert, no transfer of glass plates during gel casting is necessary. The insert utilises unique sliding clamps allowing very rapid set up of both hand cast and precast gels. Run up to 4 hand cast or 2 pre-cast gels simultaneously. Ultra soft silicone seals and pressure bars which surround the glass plates guarantee leak proof gel casting. 2mm thick glass plates prevent breakage and have bonded spacers for convenience. Accessory electroblotting and tube gel modules are included which use the same outer tank and lid.

Includes Mini gel tank and lid with power cables, 2x sets of glass plates with 1mm bonded spacers, 1x dummy plate, 2x combs of your choice, casting base, silicone casting mat, cooling pack, internal running module for tube gels, capillary tubes, blanking ports, 2-D combs and spacers, blotting insert, 4x compression cassettes and 16x fibre pads. Please note if comb thickness is changed, spacers will also need to be changed.

Specifications
Sample Capacity: 80 slab gel samples (20 per gel), 10 tube gels, 4 blots
Unit Dimensions: 19x13x15cm
Number of gels: 4 handcast or 2 pre-cast
Buffer Volume for 2 or 4 gels: Minimum 250ml, Maximum 1200ml
Combs available (number of sample wells): 1, 5, 8MC, 9, 10, 12, 16MC, 20 - MC denotes well spacings are compatible with multichannel pipettes
Comb thicknesses: 0.75, 1, 1.5, 2mm
Recommended Power Supply: EL2705, EL2707, EL2730, EL2750 (for blotting)
Typical Running Conditions for SDS PAGE: 90-225V (constant) or 120-240mA for 40 to 60 minutes

Accessories
EL2000-10-1 Comb 10 sample, 1mm for Mini Vertical
EL2000-1-1 Comb 1 Prep, 1mm - Vertical mini
EL2000-12-1 Comb 12 sample, 1mm - Vertical mini
EL2000-16MC-1 Comb 16 well MC, 1mm - Vertical mini
EL2018 Clarit-E Vertical 10x10cm Dual Caster
EL2026 Tube Unit For 10x10 Vertical Mini
EL2028 Tube Gel Insert & 10 Tubes For 10x10cm
EL2030 Mini Capillary Tubes 1mm Internal Diam
EL2032 Mini/Maxi Capillary Blanking Ports
EL2034 Blot Insert + 4 Cassettes 10x10cm
EL2034-HI High Intensity Blot Mini insert 10x10cm
EL2036 Blotting Cassette For 10x10cm Vertical
EL2038 Fibre Pads For Clarit-E Vertical Mini
EL2040 Mini Cooling Pack for Vertical mini
EL2042 10x10cm Notched Glass Plates 2mm
EL2044 10x10cm Plain Glass Plates 2mm
EL2050 10x10cm Plain Plates + 1mm Spacers
EL2060 10x10cm Notched Plates + 1mm Spacers
EL2164 Multi 6 Caster For 8x10 & 10x10cm Gels
EL2166 Multi 12 Caster For 8x10 & 10x10cm Gels
EL2168 Multi 24 Caster For 8x10 & 10x10cm Gels
EL2356 Mini Capillary Tubes 1.5mm Internal Diam