Absorbent 1 bay pouch capable of absorbing liquid from 1 typical blood tube used in sample transport when packaging to UN3373 regulations

These super absorbent 1 bay pouches can be used with all types of packaging to help meet UN3373 regulations.

UN3373 Standard – Key Requirements
The P650 packaging instructions for liquid substances state:-
a. The primary receptacle(s) shall be leak proof;
b. The secondary packaging shall be leak proof;
c. The primary receptacle or the secondary packaging shall be capable of withstanding, without leakage, an internal pressure of 95 kPa (0.95 bar);
d. If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them;
e. Absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging;
f. Either the secondary or outer packaging must be rigid.
The packaging must be of good quality and strong enough to withstand the shocks and loadings normally encountered during transport. It must prevent any loss of contents that could occur due to vibration or changes in temperature, humidity or pressure.

This 1 bay pouch design is suitable for sending 1 blood type or similar tubes. The pouch can absorb sufficient liquid such that if the vial failed in some way, all the liquid would be absorbed. Absorbency is measured using a blood substitute and greater volumes will be absorbed with other fluids.

Specification
Form: 1 bay pouch
Pouch Dimensions: 50x120mm + 10mm
Absorbency: 1x blood collection type tubes (max 16ml)
Colour: White
Packaging: Pack of 1,000 pre-formed into pouches