Clarit-E Vertical Electrophoresis System....
Setting a new standard in electrophoresis
The Clarit-E range of Vertical Gel Units combines ease of use with high resolution separations. Three sizes, Mini 10 x 10cm, Mini Wide 20 x 10cm and Maxi 20 x 20cm, share a host of common features including a guaranteed leak proof seal required for trouble free, rapid and uncomplicated gel casting. Utilising a built in gel running module eliminates time consuming transfer of glass plates during casting, a process which can cause gel damage and misalignment. Glass plates with permanently bonded spacers, guarantee perfect spacer alignment. The glass plate sandwich is simply inserted between pressure bars and a minimum of screws tightened – only one screw per side for Clarit-E Mini or new zero screw slide clamps. This ensures fast set up times while even pressure bars and ultra soft seals guarantee leak proof casting. Once the gel has polymerised, the gel running module is simply inserted into the gel tank for electrophoresis.
Interchangeable Modules
- Double hinged cassettes for added convenience
- Retractable connectors compatible with most major power supplies
-
Corrosion resistant, 99.99% pure platinum electrodes and gold plated terminals - easily replaced, ensuring minimum repair times
Extensive range of combs and spacers
Four thicknesses, colour coded
-
purple: 0.5mm for ultra resolved bands
-
black: 0.75mm for ultra resolved bands
-
white: 1mm supplied as standard
-
red: 1.5mm for maximizing sample volume
-
blue: 2mm for maximizing sample volume
Options for Sample Prep
Options for multi channel pipette compatibility
The number of samples can be maximised using high tooth number combs
All units are CE marked and are in conformity with the relevant CE Safety Directives: 73/23/EEC: LOW VOLTAGE DIRECTIVE: IEC 61010-1:2001. EN 61010-1:2001; 89/336/EEC EMC DIRECTIVE: EN55011 Emissions, EN50082-1 Immunity.
Related Information
|
10 x 10cm gels for SDS PAGE, native PAGE, gradient, second dimension and nucleic acid separations
|
|
|
20 x 10cm gels for SDS PAGE, native PAGE, gradient, second dimension and nucleic acid separations
|
|
20 x 20cm plates for SDS PAGE, native PAGE, gradient, second dimension and nucleic acid separations
|
|
|
30 x 22cm plates for second stage 2-D electrophoresis.
|
|
|
20 x 50cm for DNA sequecing, 2-D analysis, micro-satellite analysis, DNA finger printing, gel shift assays, SSCP, heteroduplex and oligonucleotide analysis
|
|
|
For tube gel electrophoresis, PAGE and blotting all within the same outer tank.
|
|
These stand-alone, complete units for 1st and 2nd stage 2-D electrophoresis etc.
|
|
This IEF system has been designed to allow the full range of IEF flat bed electrophoresis techniques.
|